DOI: https://doi.org/10.14710/jtsiskom.2.4.2014.267-276

Perancangan Jaringan Sensor Nirkabel (JSN) untuk Memantau Suhu dan Kelembaban Menggunakan nRF24L01

Design of wireless sensor networks (WSN) to monitor temperature and humidity using nrf24l01

*Dwi Intan Af'idah  -  Program Studi Sistem Komputer, Universitas Diponegoro, Indonesia
Adian Fatchur Rochim  -  Program Studi Sistem Komputer, Universitas Diponegoro, Indonesia
Eko Didik Widianto  -  Program Studi Sistem Komputer, Universitas Diponegoro, Indonesia
Published: 31 Oct 2014.
Fulltext |
Open Access Copyright (c) 2014 Jurnal Teknologi dan Sistem Komputer under http://creativecommons.org/licenses/by-sa/4.0.

Citation Format:
Abstract
The environmental condition in a large areas often requires the monitoring. For example, in the case of greenhouse were used to cultivation experiments, fertilization experiments, plant resistance experiments, tissue culture experiments, experimental planting of crops in the off-season, and it needs equipment to monitor and control the environmental conditions to suit the characteristics required environment. The extent of land that is must be monitored, making it needs distribute the monitor at some point so that monitoring of environmental conditions can cover the entire desired area. This is the basis for the design of wireless sensor network for monitoring temperature and humidity using the communication module nRF24L01 +. The system consists of hardware for measuring the temperature and humidity at some point in a certain area. The system is divided into several sections that is referred to as nodes. Node in the system is divided into two functions, namely the sensor node and the concentrator node.. There are two the sensor nodes which will serve to data of temperature and humidity in separate areas and transmit data to the concentrator node. The communication between nodes is done using a module nRF24L01+. The design of communication protocol designed to connect between nodes concentrator with a sensor node capable of running properly. This makes the system capable of monitoring temperature and humidity through a web page, so it can be known conditions of temperature and humidity at some point at the maximum range of 93 meters.
Keywords: Wireless Sensor Networks; Temperature and Humidity Monitor; nRF14L01+

Article Metrics:

Article Info
Section: Original Research Articles
Language : ID
Statistics: 1464 1611
Share:
Related articles
Perancangan Sistem Sensor Pemonitor Lingkungan Berbasis Jaringan Sensor Nirkabel Perancangan Protokol Komunikasi untuk JSN (Jaringan Sensor Nirkabel) pada Kampus Hijau Rancang Bangun Sistem Pendukung Keputusan Penentuan Indeks Lingkungan pada Jaringan Sensor Nirkabel More related articles
Most cited articles
Parameter tuning in KNN for software defect prediction: an empirical analysis PSS Tuning on Power Generator System using Flower Pollination Algorithm Pengembangan Aplikasi Multimedia untuk Pembelajaran Satelit Astronomi NASA dengan Teknologi Augmented Reality Berbasis Android Identification of Rupiah Paper Currency Denomination using SURF and FLANN Methods at Rotation Variation Perancangan Jaringan Sensor Terdistribusi untuk Pengaturan Suhu, Kelembaban dan Intensitas Cahaya More cited articles

Last update: 2021-03-07 12:11:53

  1. Cashless Payment System Using RFID with NRF24L01 Communication

    Baihaqi Siregar, Nabil Munawar, Seniman, Fahmi. 2020 4rd International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), 2020. doi: 10.1109/ELTICOM50775.2020.9230481

  2. Monitor Kualitas Udara Berbasis Web Menggunakan Raspberry Pi dan Modul Wemos D1

    Frenki Tahir, Wrastawa Ridwan, Iskandar Zulkarnain Nasibu. Jurnal Teknik, 18 (1), 2020. doi: 10.37031/jt.v18i1.57

Last update: 2021-03-07 12:11:55

  1. Performance of closed-type irrigation system at a greenhouse

    Dewi V.A.K.. Agricultural Engineering International: CIGR Journal, 22 (4), 2020.

  2. Design of Wireless Sensor Network (WSN) with RF Module for Smart Irrigation System in Large

    Radi. 2018 International Conference on Computer Engineering, Network and Intelligent Multimedia, CENIM 2018 - Proceeding, 2018. doi: 10.1109/CENIM.2018.8710986
Copyright (c) 2014 Jurnal Teknologi dan Sistem Komputer
under http://creativecommons.org/licenses/by-sa/4.0.

Starting in 2021, the author(s) whose article is published in the JTSiskom journal attain the copyright for their article. By submitting the manuscript to JTSiskom, the author(s) agree with this policy. No special document approval is required.

The author(s) guarantee that their article is original, written by the mentioned author(s), has never been published before, does not contain statements that violate the law, does not violate the rights of others, is subject to copyright that is held exclusively by the author(s), and is free from the rights of third parties, and that the necessary written permission to quote from other sources has been obtained by the author(s).

The author(s) retain all rights to the published work, such as (but not limited to) the following rights:

  • Copyright and other proprietary rights related to articles, such as patents,
  • The right to use the substance of the article in its own future works, including lectures and books,
  • The right to reproduce articles for its own purposes,
  • The right to archive articles yourself (please read our deposit policy), and
  • The right to enter into separate additional contractual arrangements for the non-exclusive distribution of published versions of articles (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of its initial publication in this journal (Journal of Technology and Computer Systems).

If the article was prepared jointly by more than one author, each author submitting the manuscript warrants that they have been given permission by all co-authors to agree to copyright and license notices (agreements) on their behalf, and agree to notify the co-authors of the terms of this policy. JTSiskom will not be held responsible for anything that may arise because of the writer's internal dispute. JTSiskom will only communicate with correspondence authors.

Authors should also understand that once published, their articles (and any additional files, including data sets, and analysis/computation data) will become publicly available. The license of published articles (and additional data) will be governed by the Creative Commons Attribution license as currently featured on the Creative Commons Attribution-ShareAlike 4.0 International License. JTSiskom allows users to copy, distribute, display and perform work under license. Users need to attribute the author(s) and JTSiskom to distribute works in journals and other publication media. Unless otherwise stated, the author(s) is a public entity as soon as the article is published.