Program Studi Sistem Komputer, Universitas Diponegoro, Indonesia
BibTex Citation Data :
@article{JTSISKOM12674, author = {Anggoro Mukti and Oky Dwi Nurhayati and Eko Didik Widianto}, title = {Rancang Bangun Sistem Kontrol Robot Line Follower Menggunakan Logika Fuzzy}, journal = {Jurnal Teknologi dan Sistem Komputer}, volume = {3}, number = {4}, year = {2015}, keywords = {Robotic; fuzzy logic; line follower robot; FLC}, abstract = {Line follower robot is a robot that can follow a line composed of a series of electronic components are equipped with wheels and driven by a motor. Controlling speed is very dependent on the speed limit and friction between the tire robot with the floor. The robots are designed to navigate and move automatically follow a flow line in order to get a response and speed are ideal.. The system consists of hardware and software. The hardware consists of a sensor such as a photodiode input, ATMEGA32 as microcontroller and DC motors. fuzzy logic is divided into three processes namely fuzzyfikasi, evaluation and defuzzyfikasi rule. Defuzzification a conversion step in fuzzy logic system to keluaran crisp value. The conversion result is an action taken by Fuzzy logic control system. The test results were obtained system is capable of identifying a straight line, turn lanes, and lane gray. The system is able to provide an ideal response and speed. input from the reading of the line will be processed by the control system fuzzy and outputs the result as the calculating of the motor speed. fuzzy control system can be an alternative technology development line follower robot control system.}, issn = {2338-0403}, pages = {536--543} doi = {10.14710/jtsiskom.3.4.2015.536-543}, url = {https://jtsiskom.undip.ac.id/article/view/12674} }
Refworks Citation Data :
Article Metrics:
Last update:
Implementasi Fuzzy Logic Controller untuk Kendali Robot Line Follower berbasis Computer Vision
Last update: 2024-11-27 11:37:14
Starting from 2021, the author(s) whose article is published in the JTSiskom journal attain the copyright for their article and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. By submitting the manuscript to JTSiskom, the author(s) agree with this policy. No special document approval is required.
The author(s) guarantee that:
The author(s) retain all rights to the published work, such as (but not limited to) the following rights:
Suppose the article was prepared jointly by more than one author. Each author submitting the manuscript warrants that all co-authors have given their permission to agree to copyright and license notices (agreements) on their behalf and notify co-authors of the terms of this policy. JTSiskom will not be held responsible for anything arising because of the writer's internal dispute. JTSiskom will only communicate with correspondence authors.
Authors should also understand that their articles (and any additional files, including data sets and analysis/computation data) will become publicly available once published. The license of published articles (and additional data) will be governed by a Creative Commons Attribution-ShareAlike 4.0 International License. JTSiskom allows users to copy, distribute, display and perform work under license. Users need to attribute the author(s) and JTSiskom to distribute works in journals and other publication media. Unless otherwise stated, the author(s) is a public entity as soon as the article is published.
