Sistem Pemantau Gas di Tempat Pembuangan Sampah Akhir Berbasis Internet of Things

Landfill Gas Monitoring System Based on Internet of Things

*Fathur Zaini Rachman orcid scopus  -  Departement of Electrical Engineering, Politeknik Negeri Balikpapan, Indonesia
Received: 22 May 2018; Published: 31 Jul 2018.
Open Access Copyright (c) 2018 Jurnal Teknologi dan Sistem Komputer
Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Citation Format:
Article Info
Section: Articles
Language: ID
In Volume 6, Issue 3, Year 2018 (July 2018)
Statistics: 1122 1065
Abstract
This research developed a gas monitoring system in the final waste disposal. The system has implemented the Internet of Things (IoT) using the ESP8266 Wi-Fi module to transmit methane (CH4) and carbon dioxide (CO2) data concentration, as well as temperature and humidity to the ThingSpeak server. Users can monitor and access these environmental data through social media Twitter and websites from anywhere. The fastest data delivery can be obtained with a time interval of 16 seconds on each data packet sent when there is an Internet connection.
Keywords
gas monitoring system; CH4 and CO2 measurements; landfill gas monitoring; environmental IoT

Article Metrics:

  1. T. Sukrorini, "Kajian Dampak Timbunan Sampah terhadap Lingkungan di Tempat Pembuangan Akhir (TPA) Putri Cempo Surakarta," Tesis, Universitas Sebelas Maret, Surakarta, 2014.
  2. S. Sabella, "Risiko Gangguan Kesehatan pada Masyarakat di Sekitar Tempat Pembuangan Akhir (TPA) Sampah Tanjungrejo Kabupaten Kudus," Skripsi, Universitas Negeri Semarang, Semarang, Maret 2014.
  3. A. D. Firdaus, "Analisis Resiko Pajanan NH3 dan H2S Terhadap Gangguan Pernapasan pada Penduduk di Sekitar Pembuangan Akhir Sampah Bukit Pinang Samarinda," Jurnal Kesehatan Masyarakat, vol. 2, no. 1, pp. 49-56, 2016
  4. H. Astika and Z. Zulfahmi, "Aplikasi Pendeteksi Gas Metana Menggunakan Teknologi Sinar Infra Merah pada Tambang Batubara Bawah Tanah," Jurnal Teknologi Mineral dan Batubara, vol. 9, no. 1, pp. 1-10, 2013.
  5. I. Sugriwan, A. J. Fuadi, and S. Riadi, "Desain dan Fabrikasi Alat Ukur Kadar Gas Metana (CH4) pada Lahan Gambut Menggunakan Sensor TGS2611 Berbasis ATMega8535," Jurnal Neutrino, vol. 8, no. 1, pp. 11-20, Oktober 2015.
  6. S. I. Masruroh, "Deteksi Sebaran Gas Metana (CH4) di TPA Pakusari Jember Menggunakan Sensor TGS 2611," Skripsi, Universitas Jember, Jember, 2017.
  7. R. Alfanz, A. Nurhadi, and J. A. Laksmono, "Perancangan Dan Implementasi Sistem Monitoring Produksi Biogas Pada Biodigister," Jurnal Nasional Teknik Elektro, vol. 5, no. 1, pp. 2–8, 2016.
  8. N. Maulana, O.D. Nurhayati, and E.D. Widianto, " Perancangan Sistem Sensor Pemonitor Lingkungan Berbasis Jaringan Sensor Nirkabel," Jurnal Teknologi dan Sistem Komputer, vol. 4, no.2, pp. 353-360, 2016
  9. E.D. Widianto, A.F. Rochim, and O.D. Nurhayati, "WSN Infrastructure for Green Campus Development," in Pros. Int. Conf. On Information Technology Systems and Innovation (ICITSI), Bali, 2015.
  10. F. Z. Rachman, "Smart Home Berbasis IoT," dalam Prosiding SNITT Poltekba, 2017, pp. 369–374.
  11. F. Z. Rachman, A. Armin, N. Yanti, and Q. Hidayati, "Implementasi Jaringan Sensor Nirkabel Zigbee Menggunakan Topologi Mesh Pada Pemantauan Dan Kendali Perangkat Ruang," Jurnal Teknologi Informasi dan Ilmu Komputer, vol. 4, no. 3, pp. 201–206, 2017.
  12. F. Z. Rachman, "Prototype development of monitoring system in patient infusion with wireless sensor network," in Proc. 2015 International Seminar on Intelligent Technology and Its Applications (ISITIA), 2015.
  13. B. Preveze and A. Şafak, "Throughput Improvement of Mobile Multi-Hop Wireless Networks," International Journal of Wireless & Mobile Networks, vol. 2, no. 3, pp. 120–139, 2010.
  14. N. Nurazizah, O. D. Nurhayati, and E. D. Widianto, "Perancangan Protokol Komunikasi untuk JSN (Jaringan Sensor Nirkabel) pada Kampus Hijau," Jurnal Teknologi dan Sistem Komputer, vol. 4, no. 2, pp. 344-352, 2016.

Copyright (c) 2018 Jurnal Teknologi dan Sistem Komputer Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

The Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to JTSiskom journal and Department of Computer Engineering, Universitas Diponegoro as the publisher of the journal. Copyright encompasses rights to reproduce and deliver the article in all form and media, including reprints, photographs, microfilms, and any other similar reproductions, as well as translations. 

JTSiskom journal and Department of Computer Engineering, Universitas Diponegoro and the Editors make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in JTSiskom journal are the sole and exclusive responsibility of their respective authors and advertisers.

The Copyright Transfer Form can be downloaded here: [Copyright Transfer Form JTSiskom]. The copyright form should be signed originally and send to the Editorial Office in the form of original mail, scanned document or fax :  

Eko Didik Widianto (Editor-in-Chief)
Editorial Office of Jurnal Teknologi dan Sistem Komputer
Department of Computer Engineering, Universitas Diponegoro
Jl. Prof. Soedarto, Kampus Undip Tembalang, Semarang, Central Java, Indonesia 50275
Telp./Fax: +62-24-76480609
Email: jtsiskom@ce.undip.ac.id